Fax Procedure
189
Fax
4
Document Glass
The document glass supports a single sheet, a book, or other similar documents with sizes
from 15 x 15 mm to 297 x 432 mm (Standard size: A3, 11 x 17").
z
Always close the document cover after using the document glass.
The document glass automatically detects standard size documents.
z
The standard document sizes that can be detected automatically depend on [Paper Size Settings] in the System Administration
mode. For information on [Paper Size Settings], refer to "Tools" > "Common Service Settings" > "Other Settings" > "Paper Size
Settings" in the Administrator Guide.
1 Open the document cover.
z
Ensure that the touch screen is active, and then load a document. Otherwise, the machine may not properly
detect the document size.
2 Load the document face down, and align it against the top left corner of the document
glass.
z
When you load a A5, B5 or A4 document on the document glass in portrait orientation, the scanned image is
transmitted with 180 degrees rotated.
3 Close the document cover.
z
When a standard size document is loaded on the document glass, the size of the document is displayed in the
message field.
Do not apply excessive force to hold thick document on the document glass. It
may break the glass and cause injuries.
To Next Page
Loading...
Need help?
General
