Product Overview
52
Product Overview
2
2 Press the push-button power switch to switch the power off.
z
Power off processing is performed internally on the machine for a while after the power is switched off.
Therefore, do not switch the main power off immediately after switching the power off.
z
When powering the machine on after it has been switched off, wait until the flash of the <Power Saver>
button ends after the touch screen has gone dark.
Switching the Main Power Off
The following describes how to switch the main power off.
z
Do not switch the main power off when a screen is displayed on the touch screen or while the <Power Saver>
button is blinking. Switching off the main power under such circumstances may damage the hard disk and
the memory or cause a machine malfunction.
z
Switch the main power off first when unplugging the power cord. Unplugging the power cord with the main
power on may damage the hard disk and the memory or cause a machine malfunction.
1 Make sure that the power is switched off.
2 Make sure that the touch screen is blank and the <Power Saver> button does not light up.
3 Open the front cover.
To Next Page
Loading...
Need help?
General
