Operations during Copying
87
Copy
3
Operations during Copying
This section describes available operations during copying.
Stopping the Copy Job
To cancel a copy job in progress, use the following procedure.
1 Press either the <Stop> button on the control panel or [Delete] on the touch screen.
2 Select [Delete].
îš„If [Delete] does not appear on the screen:
1 Press the <Job Status> button.
2 Select the job to cancel.
z
Select [ ] to return to the previous screen or [ ] to move to the next screen.
z
Scroll the list by drag or flick operation to switch the screen to be displayed. For information on how to drag or
flick, refer to "Touch Screen" (P.74).
To Next Page
Loading...
Need help?
General
