Broadcast
289
Fax
4
F Code Method
You can perform Relay Broadcast by registering the relay station’s F code and password (if
necessary) to the machine.
z
When performing Relay Broadcast with the F Code method, you can use a password if you set a receive
password for the relay station.
z
When performing Relay Broadcast between Fuji Xerox manufactured machines that can be used as both an
initiating station and a relay station, we recommend that you use the fax signal method.
z
Confirm the F code (sub-address) and password of the target relay station.
1 Select the [Fax/Internet Fax Options] tab to display the [Fax/Internet Fax Options] screen.
2 Select [F Code].
3 Select [On].
4 Select the [F Code] box, and enter the F code with the numeric keypad.
z
You can enter up to 20 digits for the F Code.
z
Relay Broadcast
The number of digits of the relay station ID:
1: When the relay station IDs and address numbers are two digits
2: When the relay station IDs and address numbers are three digits
z
Print Directive
Printing/not printing at the relay station
Relay
Broadcast
Print
Directive
Relay
Station ID
Address
Number
Address
Number
Address
Number
....
Up to 20 digits
To Next Page
Loading...
Need help?
General
