Broadcast
291
Fax
4
Fax Signal Method
Register the following information in the address numbers of initiating stations in advance.
z
For information on how to register address numbers, refer to "Tools" > "Setup" > "Add Address Book Entry" in the Administrator
Guide.
z
For information on the setting items to be registered in a primary relay station and a secondary relay station, refer to the
documentations provided with them.
1 Select an address number or group dial number to which a remote relay broadcast is
registered, and press the <Start> button.
DTMF Method
The following two types are available in the DTMF method: Auto Send and Manual Send.
z
For information on how to register address numbers, refer to "Tools" > "Setup" > "Add Address Book Entry" in the Administrator
Guide.
z
For information on the setting items to be registered in a primary relay station and a secondary relay station,
refer to the documentations provided with them.
z
You can specify any machine that supports our DTMF method feature.
îš„ Auto Send (Transmitting without picking up the receiver)
1 Select the keyboard button to display the keyboard on the touch screen and enter in the
following format.
z
Password
A pre-registered 2-digit number
z
By default, no password is set. For setting a password, contact our Customer Support Center. If a password is
not set, you do not need to enter one.
z
Relay Station ID
The last two digits of the initiating station address number registered at the primary
relay station
z
Address Number
Where Contents
Initiating
Station
Assign the relay station to an address number (0001 to 2000) to set up the Relay
Broadcast feature.
z
Register the last two digits of the address number of the initiating station (which is
already registered at a primary relay station) as a relay station ID.
z
Register the address numbers or group dial number of the secondary relay stations
(which are registered at a primary relay station) as broadcast recipients.
Password
Primary relay station
telephone number
Relay
station ID
Address
number
To Next Page
Loading...
Need help?
General
