To Next Page

To Previous Page

System Settings Procedure

111

Tools

Step 5 Setting a Feature

Select any feature.

Note • Select a submenu from the [Group] list, and then select a feature from the [Features] list.

• Select [ ] or [ ] as required.

Select an item to set.

After setting the feature, select [Save].

Select [Close] repeatedly until the Services Home screen is displayed.

Note • If rebooting the machine is required to enable the new settings, when you select [Close] in the

[Tools] screen, a message may be displayed. Follow the message and reboot the machine. After the

machine reboots, it exits from the System Administration mode, and the <Log In/Out> button is

unlit.

• When you configure settings under [System Settings] or [Setup] and then press the <Services Home>

button, the screen directly goes back to the Services Home screen.

Step 6 Exiting System Administration Mode

Press the <Log In/Out> button.

Note • You can also log out by pressing the login information field on the touch screen, and then selecting

[Logout].

• The <Log In/Out> button is unlit when the machine exits from the System Administration mode.

Fuji Xerox DocuPrint CM415 AP Administrator's Guide

Other manuals for Fuji Xerox DocuPrint CM415 AP