Notes and Restrictions
589
Appendix
15
z
Functions to control jobs, such as canceling or suspending jobs, are not provided. Instead,
you can cancel a job on the [Job Status] screen from the control panel, or from
CentreWare Internet Services.
z
The machine prints jobs in the order in which they are spooled. The jobs may not be
printed in the order in which the job requests are received by the machine.
z
If the power is switched off, this feature can store the order of jobs spooled and their data.
If the power switched off while a job is being received, the job is deleted.
îš„ Paper Orientation when Printing Mixed Size Originals
z
The document orientation (portrait or landscape) may not be determined correctly
depending on the application being used. In this case, the output may have a different
orientation from the document orientation, depending on the combination of the mixed
size originals.
z
The output may have a different orientation from the original orientation when a
document stored in a folder is printed.
îš„ Direct Fax Driver
The direct fax driver does not support Envelope (90 x 205 mm), Envelope (162 × 229 mm),
Envelope (229 × 324 mm), and Envelope (235 × 120 mm).
îš„ Printing via lpr Port
When a print job is sent via the lpr port, the characters of user name, file name, or host name
may be garbled and displayed incorrectly on the screen during printing, the job confirmation
screen, or the Job History Report.
To prevent character garbling, use a port other than lpr.
îš„ When Using the Authentication Feature on the machine
When you set the authentication information on the print driver, set the User ID up to 32
single-byte characters (16 double-byte characters). If you set the User ID using 17 double-
byte characters or more, an authentication error occurs so that you cannot start printing.
Notes and Restrictions on the Use of the Scan Features
This section describes notes and restrictions to observe when using the Scan features.
For the notes and restrictions on Network Scan Driver and Stored File Manager 3, refer to the Readme contained in the
Media (Software/Product Manual).
îš„ Retrieving Files from Folder
z
When [Delete Files After Retrieval] is set to [No], the same file can be accessed by multiple
clients.
When [Delete Files After Retrieval] is set to [Yes], only one client can access any given file.
The file that is being imported by a client cannot be seen by other clients.
z
When files are retrieved from CentreWare Internet Services, the files are not deleted
regardless of the setting of [Delete Files After Retrieval].
îš„ Using Network Scan Driver and Stored File Manager 3 Simultaneously
You cannot use both the Network Scan Driver and Stored File Manager 3 on a single
computer to connect to the machine.
A maximum of three computers using either the Network Scan Driver or Stored File Manager
3 may retrieve files simultaneously from one machine.
To Next Page
Loading...
Need help?
General
