3 Maintenance
72
Maintenance
3
6
Insert the Tray 5 (Bypass), push it all the way in
until it stops, and close it.
7
Reconnect the power code and cables and turn on the machine.
Cleaning the roller of Tray 5 (Bypass)
1
Switch the power off.
2
Switch the main power off and disconnect the power cord and other cables.
3
Open the Tray 5 (Bypass) and remove the
remaining paper on the tray.
4
Grasp the both sides of the Tray 5 (Bypass) and
pull it out.
5
Wipe the roller softly with a cloth moistened
with water.
Important • Do not rotate the roller forcibly. It may
damage the roller.
To Next Page
Loading...
