To Next Page

To Previous Page

4 Fax

198

Fax

A file received in the folder can automatically be printed depending on the folder settings. For information on the folder

settings, refer to "Configuring/Starting Job Flow" (P.318).

Depending on the report print settings, a Folder Report may not be printed even after a file is received in a folder. For

information on the Folder Report setting, refer to "5 Tools" > "Common Service Settings" > "Reports" > "Folder Report" in the

Administrator Guide.

For information on how to print files received in a folder, refer to "Printing Files in a Folder" (P.316).

Sending to Folder (F Code Method)

Select [F Code]

2 Select [On].

3 Select the [F Code] box, and enter an F code using the displayed keyboard or the numeric

keypad.

Note •You can enter up to 20 digits for the F code.

4 If necessary, select the [Password] box, and enter a password using the displayed keyboard

or the numeric keypad.

Note •You can enter up to 20 digits for the password.

 Off

The F code transmission is not used.

 On

The F code transmission is used. Enter the F Code.

 F Code

Select the [F Code] box, and enter the F code using the displayed keyboard or the numeric

keypad.

Note •You can enter up to 20 digits for the F Code.

 Password

Select the [Password] box, and enter the password using the displayed keyboard or the

numeric keypad. If a password is not set, leave this box blank.

Note •You can enter up to 20 digits for the password.

 Keyboard

Enter the F code or the password using the displayed keyboard.

For information on how to enter texts, refer to "Entering Text" (P.78).

5 Specify a destination, and then press the <Start> button.

Fuji Xerox DocuPrint M465 AP User Manual

Other manuals for Fuji Xerox DocuPrint M465 AP