Troubleshooting 112
Print Quality Problems
This section includes:
• "The Output Is Too Light" on page 113
• "Toner Smears or Print Comes Off/Stain on Back Side" on page 114
• "Random Spots/Blurred Images" on page 115
• "The Entire Output Is Blank" on page 116
• "Streaks Appear on the Output" on page 117
•"Mottle" on page118
• "Ghosting" on page 119
• "Fog" on page 120
• "Bead-Carry-Out (BCO)" on page 121
• "Auger Mark" on page 122
• "Wrinkled/Stained Paper" on page 123
• "The Top Margin Is Incorrect" on page 124
• "Protrudent/Bumpy Paper" on page 125
NOTE:
• In this section, some procedures use the Printer Setting Utility or the SimpleMonitor.
See also:
• "Printer Setting Utility (Windows Only)" on page 41
• "SimpleMonitor (Windows Only)" on page 42
To Next Page
Loading...
Need help?
General
