121
Troubleshooting
Bead-Carry-Out (BCO)
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact the Fuji
Xerox local representative office or an authorized dealer.
Problem Action
Bead-Carry-Out (BCO) is
happening.
If the printer is installed in a high altitude location, set the altitude of
the location.
1
Launch the Printer Setting Utility, and click
Adjust Altitude
on the
Printer Maintenance
tab.
2
Select the value close to the altitude of the location where the
printer is installed.
3
Click
Apply New Settings
button.
To Next Page
Loading...
