49 Installing the Print Driver
Inserting the Software Pack CD-ROM
1
Insert the Software Pack CD-ROM into your computer’s CD-ROM drive to start Easy Install
Navi.
NOTE:
• For Windows 8 and Windows Server 2012, click on the message displayed on the upper right corner of
the screen, and then select Run setup.exe.
• If the CD does not automatically launch, perform the following steps.
a For Windows XP, Windows Server 2003, Windows Server 2008 and Windows Server 2008 R2, click
Start (start for Windows XP) → Run.
For Windows Vista and Windows 7, click Start → All Programs → Accessories → Run.
For Windows 8 and Windows Server 2012, right-click on the Start screen and click All apps → Run.
b Enter "D:\setup.exe" (where D is the drive letter of your computer's optical drive), and then click OK.