Fuji Xerox DocuPrint P215 b

Basic Operation 36
 Setting the Time for the Power Saver Mode
You can specify the time for the Power Saver mode. The printer switches to the Power Saver mode
after the specified time.
The following procedure uses Microsoft
®
Windows
®
7 as an example.
1 Click start → All Programs → Fuji Xerox → Fuji Xerox Printer Software for Asia-Pacific →
DocuPrint P215 b
→ Printer Setting Utility.
NOTE:
• The window to select a printer appears in this step, when multiple print drivers are installed on
your computer. In this case, click the name of the desired printer listed in Printer Name.
The Printer Setting Utility appears.
2 Click the Printer Maintenance tab.
3 Select System Settings from the list at the left side of the page.
The System Settings page is displayed.
4 Specify Low Power Timer and Sleep Timer in Power Saver Timer.
5 Click the Apply New Settings button to take effect.