89 Printing Basics
• Using the Windows Print Driver
This section explains the procedure using Windows 7 WordPad as an example.
NOTE:
• The way to display the printer Properties/Printing Preferences dialog box differs according to the application
software. Refer to the manual of your respective application software.
1
From the File menu, select Print.
2
Select the printer as the printer to be used and click Preferences.
3
Select the Paper/Output tab.
4
Select the size of the original document from Paper Size.
5
Select the appropriate paper type from Paper Type.
6
Click the Layout tab.
7
From Output Size, select the custom size you defined. If you select the custom size from Paper
Size in step 4, select Same as Paper Size.
8
Click OK.
9
Click Print in the Print dialog box to start printing.
• Using the Mac OS X Print Driver
This section explains the procedure using Mac OS X 10.8 TextEdit as an example.
1
From the File menu, select Page Setup.
2
Select the printer from Format For.
3
From Paper Size, select Manage Custom Sizes.
4
In the Custom Paper Sizes window, click +.
A newly created setting “Untitled” is displayed in the list.
5
Double-click "Untitled" and enter the name for the setting.
6
Enter the size of the original document in the Width and Height boxes of Paper Size.
7
Specify Non-Printable Area if necessary.
8
Click OK.
9
Make sure that the newly created paper size is chosen in Paper Size, and then click OK.
10
From the File menu, select Print.
11
Press Print to start printing.
To Next Page
Loading...
