FujiFilm ASK-2000 - Page 22

22/28
E09
Error writing in Flush ROM.
Please re-start the printer.
 Please re-start the printer
E10
Failure in power supply.
Please re-start the printer.
 Please re-start the printer.
E11
Failure in grip roller movement.
Please re-start the printer.
 Please re-start the printer.
E12
E13
Please check the room thermistor in
the printer.
Please re-start the printer.
 Please check the cable to the thermistor securely
fastened.
 Please re-start the printer.
E14
E15
Please check the print-head
thermistor.
Please re-start the printer.
 Please check the cables to the thermal head securely
fastened.
 Please re-start the printer.
E16
Failed to write in EEPROM.
Please re-start the printer.
 Please re-start the printer.
*Please contact Fujifilm if you cannot fix the error.