EasyManua.ls Logo

Fujitsu Siemens Computers D1818 - LCD header (26); INTR - Chassis Intrusion Header (U)

Fujitsu Siemens Computers D1818
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Mainboard D1818
A26361-D1818-Z120-1-7619, edition 1 3
List of features
Processor
• Dual µPGA 940-pin ZIF sockets
• Supports up to two AMD Opteron
™
processors
• Two onboard 3-phase VRMs
• 128-bit DDR dual-channel memory controller integrated in CPU
Chipset
• NVIDIA nForce Pro 2200 Hyper-Transport PCI-E interface
• NVIDIA nForce Pro 2050 to provide SLI feature
• AMD-8132 PCI-X Bridge
Memory
• 128-bit DDR dual-channel memory bus
• Eight DIMM sockets (four per CPU)
• Supports 4* DDR sockets slots for Primary CPU (up to 16 GB)
• Supports 4* DDR sockets slots for Secondary CPU ( up to 16 GB)
• Supports a total of 32GB of DDR RAM
• Requires registered ECC PC2100 / PC 2600 / PC3200 RAM
Integrated I/O
• One floppy, one serial and one parallel port connector
• PS/2 KB/mouse connectors
• Total eight USB connections (four rear connectors, one dual front USB header and one internal
dual USB header with Chipcardreader support)
• One LCD connector
Expansion Slots
• Two PCI-E x16 slots
• One PCI-E x1 slot
• Two PCI-X 133 MHz slots
• One 32-bit (5 v) PCI slot
System Management
• Four 4-pin fan headers with tachometer monitoring and speed control
• One PC2004 PSU Fan header with tachometer monitoring
• 3-pin Chassis Intrusion header
Integrated Enhanced IDE Controller
• Two ports for up to four EIDE devices
• Supports up to ATA-133