Add-on modules / Upgrading
A26361-D1818-Z120-1-7619, edition 1 23
BIOS update
When should a BIOS update be carried out?
Fujitsu Siemens Computers makes new BIOS versions available to ensure compatibility to new
operating systems, new software or new hardware. In addition, new BIOS functions can also be
integrated.
A BIOS update should also always be carried out when a problem exists that cannot be solved with
new drivers or new software.
How does a BIOS update work?
► Download the update file from our website to your PC.
► Insert an empty floppy disk (1.44 MB).
► Run the update file (e.g. 1818102.EXE).
► A bootable update floppy disk is created. Leave this floppy disk in the drive.
► Restart the PC.
► Follow the instructions on screen.
BIOS Recovery
i
All BIOS settings are reset to the default values.
► Opening the casing as described in the operating manual.
► Close the jumper BIOS_RE (pin 1-2).
► Close the casing as described in the operating manual.
► Insert a BIOS Recovery Disk and start the PC.
► Note the signals issued from the buzzer or loudspeaker. You have successfully restored the
BIOS if you hear one long beep.
► Power off your system.
► Open the casing as described in the operating manual.
► Close the jumper (BIOS_RE (pin 2-3).
► Close the casing as described in the operating manual.
► Remove the floppy disk from the drive.
► Start the PC and invoke BIOS Setup.
► Select the menu item Reset configuration in the menu Advanced and change the setting to Yes.
► Save the change and terminate BIOS Setup.
The BIOS recovery has now been completed. The system restarts.
To Next Page
Loading...
Need help?
General
