148
6 Remove the handle.
・ Remove the M6 hexagon bolt with flange and the tapping screws to remove the handle
body, the rotation control member, and the lock bracket.
Note: The grip is a part separate from the handle body. Be careful because it may fall off
when the tapping screws are removed.
Be careful not to lose the parts and screws removed here. They will be used later.
Tapping screw
M6 hexagon bolt with flange
Handle body
Lock bracket
Rotation control member
Resins for fixing
handle in position
Grip
Tapping screw
To Next Page
Loading...
