60
Menu Field Options Default Description
Autotype Fixed Disk: [Press Enter] Selecting this field activates your notebook to search for
indentification of the drive,if any, which is installed on this
interface and determine its characteristics which are then
displayed and are not available to change without resetting
the Type.
Type: Auto; None;CD; User; Auto Allows you to configure the interface for almost any drive.
1-14; Rsvr; 16-39
Cylinders: (Available to A number between 0 Sets the number of cylinders for the drive. This field can be
change only when and 65,535. changed by incrementing (pressing the Spacebar) or by typing in
Type = User. Displayed the number.
for Type = Auto when a
hard drive has been detected
and Type = any number.)
Table 3-2 Fields, Options and Defaults for the IDE Adapter Submenu
C A U T I O N
Even if the item help on the right side of the screen sug-
gests that when User is selected that the None selection
for Write Precomp: can be chosen by pressing the N key.
You must use the normal selection method explained in
Navigating Through the Setup Utility on page 55.
To Next Page
Loading...
Need help?
General