C o n f i g u r i n g Y o u r L i f e B o o k 7 0 0 S e r i e s
L i f e B o o k 7 0 0 S e r i e s f r o m F uj i t s u
61
Menu Field Options Default Description
Head: (Available to A number between 1 and 16. Sets the number of sectors on the drive.This field can be changed
change only when by incrementing (pressing the Spacebar) or by typing in
Type = User.Displayed the number.
for Type = Auto when a
hard drive has been detected
and Type = any number.)
Sectors/Track: (Available to A number between 0 and 63. Sets the number of cylinders for the drive. This field can be
change only when Type = changed by incrementing (pressing the Spacebar)or by typing in
User. Displayed for Type = the number.
Auto when a hard drive has
been detected and Type =
any number.)
Write Precomp: None;A number between Sets the amount of data compression the interface will use when
(Available to change 0 and 65,534 writing to a hard drive.
only when Type =
User. Displayed for
Type = Auto when a
hard drive has been
detected and Type =
any number.)
Table 3-2 Fields, Options and Defaults for the IDE Adapter Submenu
To Next Page
Loading...
Need help?
General