79
Menu Field Options Default Description
Supervisor Password is: – Disabled A display-only field. Enabled is displayed when the system
supervisor password is set and Disabled when it is not.
User Password is: – Disabled A display-only field. Enabled is displayed when the general user
password is set, and Disabled when it is not.
Set Supervisor Password: [Press Enter] – Sets, changes or cancels the Supervisor Password.The Supervisor
Password may be up to seven characters long and must include
only lower-case letters or numbers. To cancel a password press the
Enter key instead of entering characters in the Enter New
Password field and in the Re-enter New Password field. When a
Supervisor Password is set it must be used to access the BIOS
setup utility.
Diskette access: All; Supervisor Only All Sets the floppy disk access to be secured for access only with
Supervisor’s password or by all users with a password. The default
is Supervisor Only but if no Supervisor password is set it will not
be secured at all.
Set User Password: [Press Enter] – Sets, changes or cancels the User Password. The User Password
may be up to seven characters long and must include only lower
case letters or numbers. To cancel a password press the Enter key
instead of entering characters in the Enter New Password field and
in the Re-enter New Password field. When a User Password is set
it must be used to access the BIOS setup utility.
Table 3-9 Fields, Options and Defaults for the Security Menu