Cooling A A
Heating A A
kW 8.50 9.40
BTU/h 29000 32100
kW 2.80 - 10.00 2.80 - 11.20
BTU/h 9500 - 34100 9500 - 38200
kW 10.00 11.20
BTU/h 34100 38200
kW 2.70 - 11.20 2.70 - 12.70
BTU/h 9200 - 38200 9200 - 43300
2.65 2.93
3.88 4.56
2.77 3.02
3.88 4.56
11.6 12.8
17.0 20.0
12.2 13.2
17.0 20.0
EER 3.21 3.21
COP 3.61 3.71
l/h (pints/h) 2.5(5.3) 3.0 (6.3)
High 1660 1900
Med 1500 1500
Low 1200 1200
Quiet 1000 1000
High 1660 1900
Med 1500 1500
Low 1200 1200
Quiet 1000 1000
Type × Q'ty
Motor output W 120 120
High 45 47
Med 43 43
Low 37 37
Quiet 32 32
High 45 47
Med 43 43
Low 37 37
Quiet 32 32
Dimensions (H × W × D) 252 × 1350 × 39.9 252 × 1350 × 39.9
Fin pitch 1.45 1.45
Rows x Stages 3 × 12 3 × 12
Fin type
Material
Colour
Net
Gross
Net 46 ( 101 ) 46 ( 101 )
Gross 58 ( 128 ) 58 ( 128 )
Liquid
9.52 ( 3 / 8 in.) 9.52 ( 3 / 8 in.)
15.88 ( 5 / 8 in.) 15.88 ( 5 / 8 in.)
Method Flare Flare
°C 18 to 32 18 to 32
%RH 80 or less 80 or less
Heating °C 16 to 30 16 to 30
mm
Note :
Specifications are based on the following conditions.
Cooling : Indoor temperature of 27 °CDB / 19 °CWB.and outdoor temperature of 35 °CDB/24 °CWB.
Heating : Indoor temperature of 20 °CDB / 15 °CWB.and outdoor temperature of 7 °CDB/6 °CWB.
Pipe length : 5 m, Height difference : 0 m.(Outdoor unit - Indoor unit)
The maximum current and the maximum input value are the maximum value when operated within the operation range(temperature)
Outer diameter : 26.0 / Inner diameter : 21.5
1. SPECIFICATIONS
INDOOR UNIT