EasyManua.ls Logo

Fujitsu ARGA18FMTA - Features

Fujitsu ARGA18FMTA
128 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- (01 - 01) -
DUCT TYPE
ARGA18-25FMTA
DUCT TYPE
ARGA18-25FMTA
FEATURES1.
MODELS
ARGA18FMTA / AOGA18FBTAH
ARGA25FMTA / AOGA25FBTAH
FEATURES
Installation styles
z
Slim & compact design
z
In the case of rear suction type, as seen from lower rear part.
Control Box united with main unit
One-touch operating and easy-to-install
long-life lter (optional)
In addition to the slim height of 270 mm, further compactication is attained by reducing 65 mm
from the width with the anking control box embedded inside the chassis.
Easy maintenance
z
The fan and motor is easily accessible by the divided panel structure.
Structural improvement is attained by making the
bottom panel in two pieces, front and rear.
The internal fan casing is also manufactured in two
pieces, namely upper and lower. The maintenance
of the motor and fan can be easily carried out by
removing the rear panel and the lower part of the
casing while leaving the main chassis installed.
1
3
Bottom panel: 2 units
2
4
1. Control box
2. Fan casing
3. Fan
4. Motor
Embedded in Ceiling Hanging from Ceiling
AOGA25FBTAH
AOGA18FBTAH

Related product manuals