Fujitsu ASTG09KMCA Design & Technical Manual

-
(
01 - 23
)
-
WALL MOUNTED TYPE ASTG09-12KMCA WALL MOUNTED TYPE ASTG09-12KMCA
FUNCTION DETAILS

Functions
1) Filter sign
2) Room temperature control for cooling
3) Room temperature control for heating
4) Auto restart
5) Room temperature sensor switching
6) Remote controller signal code
7) External input control
8) Indoor unit fan control for energy saving for cooling
1) Filter sign
Select appropriate intervals for displaying the filter sign on the indoor unit according to the
estimated amount of dust in the air of the room.
If the indication is not required, select "No indication" (03).
(

... Factory setting)
Setting description Function number Setting value
Standard (400 hours)
11
00
Long interval (1000 hours) 01
Short interval (200 hours) 02

No indication 03
2) Room temperature control for cooling
Depending on the installed environment, correction of the room temperature sensor may be
required.
Select the appropriate control setting according to the installed environment.
(

... Factory setting)
Setting description Function number Setting value

Standard
30
00
Slightly lower control 01
Lower control 02
Higher control 03
3) Room temperature control for heating
Depending on the installed environment, correction of the room temperature sensor may be
required.
Select the appropriate control setting according to the installed environment.
(

... Factory setting)
Setting description Function number Setting value

Standard
31
00
Lower control 01
Slightly Higher control 02
Higher control 03

Fujitsu ASTG09KMCA Specifications

General

Brand	Fujitsu
Model	ASTG09KMCA
Category	Air Conditioner
Language	English