Manual mode (For Android)
1. Launch the mobile app.
2. Sign in with your E-mail address and password following the screen on the mobile app.
john@fgl.com
ÛÛ ÛÛÛ Û
Sign in
3. Press the + button to add a new air conditioner.
4. Select manual mode.
If both of the LED 1 and 2 are off, push the setting button once.
5.
Select the SSID of the air conditioner to be connected.
AC-UTY-xxxxxxxxxx
Enter
password
ÛÛ ÛÛÛ Û
Connect device
Selected router
Input the PIN code written on the wireless LAN label.
6.
Select the SSID of the wireless LAN router to be connected.
Home AP
Enter
password
Select the WLAN
Access Point
XYZ AP
ÛÛ ÛÛÛ Û
ABC123
Connect device
Selected router
Input the wireless LAN router (wireless LAN access point) password then press Connect device
button.
7.
When setup is completed, both of the LED 1 and 2 flash 2 times, and a message appear.
Registration
Successful!
2 times
4-6. Mobile app setting method - (03-73) - 4. Troubleshooting with error code (For wireless LAN adapter)
TROUBLESHOOTING
TROUBLESHOOTING
To Next Page
Loading...
Need help?
General
