6. Press the ENTER switch button (SW3) and fix it.
PEAK CUT
MODE 1: Low
MODE 2: Lower
(L4) (L5) (L6)
7. To return to “Operating status display (Normal operation)”, press the EXIT switch button (SW4).
In case of missing how many times you pressed the
SELECT and ENTER switch buttons:
1. To return to “Operation status display (Normal operation)”, press the EXIT switch button once.
2. Restart from the beginning of setting procedure.
NOTE: In case of missing how many times you pressed the SELECT and ENTER switch buttons,
you must redo the setting procedure. Return to “Operation status display (Normal opera-
tion)” by pressing the EXIT switch button once, and restart from the beginning of the setting
procedure.
2-2. Local setting procedure - (05-13) - 2. Function settings (For outdoor unit: AOTG34KMTC only)
FIELD
WORKING
FIELD
WORKING
To Next Page
Loading...
Need help?
General
