6. Press the ENTER switch button (SW3) and fix it.
0 % of rated input ratio
50 % of rated input ratio
75 % of rated input ratio
100 % of rated input ratio
PEAK CUT
(L4) (L5) (L6)
7. To return to “Operating status display (Normal operation)”, press the EXIT switch button (SW4).
NOTE: When pressed number is lost during setting, you must redo the setting procedure. Return to
“Operation status display (Normal operation)” by pressing the
EXIT switch button once, and
restart from the beginning of the setting procedure.
2-2. Local setting procedure - (05-15) - 2. Function settings (For outdoor unit: AOTG34KMTC only)
FIELD
WORKING
FIELD
WORKING
To Next Page
Loading...
