Installing the NAS
Configuring the software settings
► Visit the website "www.fujitsu.com/fts/downloads".
► Select your NAS model.
► Select Downloads and then Applications.
► Download Fujitsu Qfinder and start the installation.
► Follow the screen instructions to install Fujitsu Q finder.
Fujitsu Qfinder will then r un automatically.
► If the programme does not start automatically, double-click on the Qfinder shortcut on the desktop.
If you are using Windows 7/8/10, the following window will be displayed:
► Set a checkmark against Private networks, such as my home or work network.
► Click o
n Allow access.
Fujitsu QFinder detects the NAS on the network and if necessary asks
whether Quick Setup should be run.
18 Fujitsu
To Next Page
Loading...
