Surveillance statio n
Prepare USB webcam (optional)
If you want to use a USB webcam instead of an IP camera, you will need a
camera with UVC (UVS Video Class) drivers.
Compatible web cams are listed at th e following link:
• Linux U V C Webcam List: "
http://www.ideasonboard.org/uvc"
The source ment ioned above is for refere nce purposes only. Fujitsu cannot
provide a guarantee for complete compatibility.
► Connect the USB webcam to the NAS USB port. If the webcam is supported, it will be
listedinanentryintheSystem Log under System Settings - System Logs.
► Install the app QUSBCam sothattheUSBwebcamcanbeusedwiththeNAS.
► To do this, open the Recomm ended category in the App Centre.
► Search for QUSBCam.
► Click on Download.
QUSBCam is installed.
► To c o nfigure settings, click on Open.
► Log in with the use r admin and the corresponding password (admin).
A maximum of two USB webcams can be used at th e same time per NAS.
68 Fujitsu
To Next Page
Loading...
