Connecting to the NAS
Accessing the NAS from Linux
In addition to operating systems from Microsoft, the NAS also supports Linux
systems using the NFS service.
► In Linux, run the following command:
mount -t nfs <NAS IP address>:/<Network Share Name><Directory to Mount>
► For example, if t he IP address of the NAS is 169.254.100.100 and the link to the network
share folder "public" should be created in the /mnt/pub directory, use the following
command: mount -t nfs 169.254.100.100:/public /mnt/pub
The above c omman d can only be executed when logged in as "root".
► Log in with the user name s pecified previously. Th e network share folder
can be accessed via the moun ted directory.
32 Fujitsu
To Next Page
Loading...
