Fujitsu CELVIN NAS QE707 - Adding drives to existing RAID groups

Connecting to the NAS
Adding drives to an existing RAID group
Note that RAID 0, RAID 10, single drive and JBOD ("just a bunch of disks")
are not supported in a storage pool expansion.
► Select Storage
manager > Storage space,clickonManage and the n to open the assistant
for the storage
pool expansion, click on Expand pool.
► Selec
t Add n ew data carrier(s) to an existing RAID group,selectanexistingRAID
grou
p from the drop -down list and then click on Next.
Fujitsu 39