Your CELVIN® NAS Server…
Safety instructions
To prevent fires, the C ELVIN® NAS QE707/QE807 must only be operated
with the original adapter
Delta Electronics, Inc. D PS65VB 12V DC / 5,417 A (CELVIN® NAS QE707)
Delta Electronics, Inc. DPS90AB-3 12V DC / 7,5 A (CELVIN® NAS QE807)
The supplied A C/D C mains
adapter must only be used with the
CELVIN® NAS QE707/QE807
.
• Your NAS can operate normally in temperatures of 0 to 40ºC and with a relative humidity
of 20 to 80% . Please m a ke sure that its operating environment is well ventilated.
• The power cord and devices connected to the NAS must be connected to a
suitable power source (90 to 264 V, 100 W)
• Do not place the NAS in direct sunlight or near chemicals. Make sure that the temperature
and humidity of the environment are within the permitted ranges.
• Unplug the power co rd and separate all connected cables before cleaning the device. Wipe the
device with a dry towel. Do not use a chemical cleaning agent or aerosol to clean your NAS.
• Do not place any objects on top of the NAS for the server’s normal
operation and to avoid overheating.
• When installing a hard disk in the NAS, use the flat head screws in the
product package to fit the hard disk in the NAS.
• Do not place the NAS near any liquid.
• Do not place the NAS on any uneven surface to avoid falling off and damage.
• Make s ure the voltage is correct in the location where the NAS is installed. If you are uncertain,
contact t hedistributor or the local power supply company for information.
• Do not place any objects on the power cord.
• Never try to repair your NAS y ourself. Improper disassembly of the product mayexpose users
to electric shock or other risks. For any enquiries, please contact thedistributor.
CE marking
CE marking for devices without wireless component supplied at launch from
20 July 2007
The shipped version of this device complies with the requirements of EU
directives 2014/ 30/EC "Elect romagn etic Compatibility", 2014/35/EC "Low voltage
directive", 2009/125/EC "Ecodesign directive" and 2011/65/EC "RoH S directive".
Fujitsu 7
To Next Page
Loading...
