Connecting to the NAS
Administering the NAS via a Web browser
under Windows
The NAS Web administration page can be accessed by the following methods:
► Find the NAS via Fujitsu Qfinder and click on Connect.
► Open a web browser and enter http://[NAS IP]:8080.
The default N AS IP is 169.254.1 00.100:8080. If the NAS has been configured to use
DHCP, then the Fujitsu Q finder can be used to check the IP address of the NAS.
Make sure that the NAS is connected to the same subnet as the computer that is
running Qfinder.IfitisnotpossibletosearchfortheIPaddressoftheNAS,please
try connecting the NAS directly to the computer. Then restart Fujitsu Qfinder.
► Enter the user name and password to log in.
Standard user name: admin
Default password: admin
The NAS supports encrypted SSL login. This allows the s erver to be con figured
and managed over and encrypted data link.
► To use this function, check the Secure login box on t he administration page
before logging in to the server.
If the NAS is situated behind a NAT gatewa y and it is necessary to allow access
to the NAS using secure login over the Internet, then Port 443 must be open
on the NAT and mapped to the LAN IP o f the NAS.
Fujitsu 27
To Next Page
Loading...
