Surveillance statio n
Set up Surveillance S tation
► To c o n figure the IP cameras log on to Surveillance Station P ro via a web browser.
► Switch to Camera settings - Camera configuration.
► Enter the IP camera information, e.g. name, model and IP address.
► If you are using a USB w ebcam, enter the following values:
Field Values
Camera brand
Generic model
Camera model
Generic JPEG
HTTP URL
/video0.cgi
IP address
localhost
Port
8168
User name
root (random entry)
Password
----- (random entry)
► To check whether the IP address or USB webcam can be successfully connected, click on Te st.
► If your IP camera supports audio recordings, you can switch on the o ptio n at Recorder setting s.
► Click Apply to save th e changes.
► Configure the settings of Camera 2 following the above steps.
► After y ou have added the network cameras to the NAS, click on Mo nitor.
► If you are accessing this page for the first time with a web brow ser, you must
install additio nal plug-ins to display the image.
You can now use the Surveillance Station monitoring and recording f unct ions.
Further information e.g. on motion detection recording, schedule recording and
video playback can be found in the software’s online help.
Fujitsu 69
To Next Page
Loading...
