EasyManua.ls Logo

Fujitsu D3358 - Board Installation; Front Panel Pin Connector (Internal); Communication Connectors; Ports for Memory Devices

Fujitsu D3358
78 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Mainboard D3358 English - 11
Fujitsu 47
Choose Proper Parts for Your System
Before you installing a system with this motherboard, make sure your major system parts meet the
following basic guidelines and requirements:
Central Processor Unit (CPU) Considerations
Single/Dual Processor System
The D3358 supports up to two Intel® Xeon® processors in an LGA2011 R3 socket.
Single Processor System:
When only installing a single processor on D3358, the processor must be installed in the CPU0
socket.
Dual Processor System:
D3358 supports dual processor configurations only in which both processors operate with the
same QPI frequency, core frequency, and have the same internal cache sizes. Mixing
processors operating at different QPI frequency, core frequency, or cache sizes may cause
system non-operation or damages on processors and/or the motherboard.
Quick Path Interconnect (QPI)
The processor host bus, or called Quick Path Interconnect (QPI), auto-operates at a frequency
up to 9.6 GT/s.
System Memory Interface
Technology
Buffered single, dual, or quad rank (LR-DIMM) DDR4 1600/1866/2133/2400 modules with ECC
Connector
288 Pin, 1.2 V / 2.5 V / 72 Bit

Table of Contents

Related product manuals