Preparing for use
Fujitsu Technology Solutions 17
– The indicator lights up orange or flashes green:
The device is ready-to-operate or in energy-saving mode. After being switched on with
the power button, the device switches on or returns to the state it was in before the
energy-saving mode.
!
In the energy-saving mode the device may not be disconnected from the mains
supply, as this may otherwise result in data loss.
– The indicator does not light up:
The device is disconnected from the power supply or is ready for operation. If your device
is ready-to-operate it can be enabled with the ON/OFF switch.
4 - Hard disk indicator
The indicator lights up when the hard disk of the device is accessed.
To Next Page
Loading...
