Fujitsu ESPRIMO E5635 - Replacing Second Hard Disk in 3 ½ Inch Drive Cage

System expansions
Fujitsu Technology Solutions 67
Replacing second hard disk in 3 ½ inch drive cage
► Open the casing (see "Opening the casing").
► Remove the cross-piece (see "
Removing the cross-piece”).
► Fold up the drive cage (see "
Folding up the drive cage").
Removing second hard disk
1
1
► Remove the screw (1).
► Disconnect the cables from the hard
disk.
► Remove the drive the direction of the
arrow out of the casing.
Installing second hard disk
1
1
► Slide the drive into the casing in the
direction of the arrow.
► Secure the hard disk with the
screws (1).
► Connect the cables.
► Fold down the drive cage (see "
Folding
down the drive cage").
► If necessary, mount the plastic drive cover (see "Installing plastic drive cover").
► Replace the cross piece (see "
Installing the cross-piece").
► Close the casing (see "
Closing the casing").
i
It may be necessary to modify the entry for the drive in the BIOS Setup.