Fujitsu ESPRIMO E5635 - Installing and Removing Board with Bracket

System expansions
Fujitsu Technology Solutions 45
Installing and removing board with bracket
You can install both low-profile boards and long boards in the board bracket.
Removing board bracket
► Open the casing (see "
Opening the casing").
► Remove the cross-piece (see "
Removing the cross-piece”).
► Pull the board bracket out of the casing in
the direction of the arrow.
Installing board bracket
► Insert the board bracket into the casing in
the direction of the arrow until it clicks into
position.
► Replace the cross piece (see "
Installing
the cross-piece").
► Close the casing (see "
Closing the
casing").