System expansions
40 Fujitsu Technology Solutions
Installing and removing the cross-piece
► Open the casing (see "Opening the casing").
Removing the cross-piece
a
► Lift off the cross-piece upward at the
marking (a) in the direction of the arrow.
Installing the cross-piece
a
► Insert the cross-piece into its guide
lugs (a) on the front of the casing at an
angle from above.
► Press the cross-piece downward in the
direction of the arrow until it rests on the
casing and engages.
► Close the casing (see "Closing the casing").
To Next Page
Loading...
