Fujitsu ESPRIMO E5635 - Replacing Drive in 5 ¼ Inch Bay

System expansions
58 Fujitsu Technology Solutions
Replacing drive in 5 ¼ inch bay
► Open the casing (see "Opening the casing").
Removing a drive
► Pull the data and the power supply connectors from the desired drive.
1
1
2
► Press the EasyChange rails (1) together
and pull the drive out of the casing (2).
► Remove the EasyChange rails from the
drive.
i
If your device is equipped with a drive carrier instead of the drive, you can remove and
install the carrier in the same way.