System expansions
66 Fujitsu Technology Solutions
2
1
3
► Fold down the power supply in the
direction of the arrow (1) until the power
supply engages.
► Press on the locking lug (2) of the drive
cage and then fold the drive cage with
light pressure in the direction of the
arrow (3) until the lever engages.
Make sure that the cables are not kinked or
pinched.
► Connect the power supply connector.
► Replace the cross piece (see "
Installing the cross-piece").
► Close the casing (see "
Closing the casing").
i
It may be necessary to modify the entry for the drive in the BIOS Setup.
To Next Page
Loading...
