Chapter 2 Startup and Shutdown
2.3 Logout
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
23
2.3 Logout
Log out from GUI to finish the operation.
The procedure for logging out is as follows:
1 Click the [Logout] link on the top right of the screen.
A confirmation screen appears.
2 Click the [OK] button.
This completes the logging out process.
The login screen appears.
A logout is performed automatically under the following conditions:
• When a different user executes a forcible logout (*1)
• When the ETERNUS DX is turned off
• When no operation is performed for 60 minutes or longer after logging in
*1: When the user name is the same as a user who is already logged in, the user who was previously logged in is
forcibly logged out.
To Next Page
Loading...
