Fujitsu ETERNUS DX100 S3 - Set Thin Provisioning

Chapter 4 Configuration Settings for RAID Groups or Thin Provisioning
4.4 When Using Thin Provisioning Volumes (TPVs)
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
55
4.4.1 Set Thin Provisioning
This function enables the Thin Provisioning function.
The procedure to enable the Thin Provisioning function is as follows:
Procedure
1 Click [Set Thin Provisioning] in [Action].
 The [Thin Provisioning Settings] screen appears.
Note that the Thin Provisioning function is not provided for the ETERNUS DX100 S3 1CM model. In addition,
the "Thin Provisioning" navigation is not displayed for this model.