Fujitsu ETERNUS DX100 S3 - Page 84

Chapter 5 Host Interface Management
5.2 Modify Port Parameters
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
84
2 Set the parameters for all of the selected ports.
The main setting items are as follows.
● Select Port
• Port
• Transfer Rate
3 Click the [Modify] button.
 A confirmation screen appears.
4 Click the [OK] button.
 Modification of the SAS port parameters starts.
5 Click the [Done] button to return to the [SAS Port] screen.
End of procedure