Chapter 5 Host Interface Management
5.3 Create CA Port Groups
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
88
2 Specify the name of the port group to be created and select all the ports to be registered in
the port group.
The main setting items are as follows.
● CA Port Group Setting
• Name
• Checkbox to select ports
3 Click the [Create] button.
A confirmation screen appears.
4 Click the [OK] button.
Registration of the FC port group starts.
5 Click the [Done] button to return to the [CA Port Group] screen.
To Next Page
Loading...
