Chapter 5 Host Interface Management
5.5 Add Host Groups
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
92
3 Register a host in a host group in the following procedures.
■ When registering a host by selecting from the host list
(1) Click the [Now Connected] tab.
(2) Select a host that is to be registered from the FC host list.
The main setting item is as follows.
● Host Group Setting
• Checkbox to select a host
(3) Click the [Add] button.
A confirmation screen appears.
If the WWN is not displayed when clicking the [Rediscover] button, make sure that there is no error in
the connection environment, such as the connection between the host and the switch, and the CA
port settings of the ETERNUS DX. If there is no error in the connection environment, contact the
Support Department, or specify the WWN manually.
To Next Page
Loading...
