EXAMPLES
For Windows
Output of performance information for a device with IP address 10.12.13.14 to the c:\work directory:
> C:\ETERNUS_SF\ESC\Manager\opt\FJSVssmgr\sbin\storageadm perfdata export "C:\work" -ipaddr
10.12.13.14
For Linux
Output of performance information for a device with IP address 10.12.13.14 to the /tmp directory:
# /opt/FJSVssmgr/sbin/storageadm perfdata export /tmp -ipaddr 10.12.13.14
NOTES
The full path of an existing directory must be specified in
outDirName
.
B.2 esfsnap (Express's Manager Troubleshooting Information
Collection Command)
NAME
esfsnap - Collects the troubleshooting information of the Express's manager
SYNOPSIS
For Windows
$INS_DIR\Common\bin\esfsnap -dir dirName [-all]
($INS_DIR means "Program Directory" specified at the ETERNUS SF Manager installation.)
For Linux
/opt/FJSVesfcm/bin/esfsnap -dir dirName [-all]
DESCRIPTION
This command collects the troubleshooting information of the Express's manager on the Management Server when a problem occurs.
Only user of OS administrative group can execute this command.
Please send the collected data to Fujitsu Technical Support.
OPTIONS
-dir
dirName
For Windows
Specify a directory where the troubleshooting data is stored. It is necessary to specify the full path name that begins with a
drive letter for
dirName
.
The maximum length that can be specified for
dirName
is 70 bytes.
The collected troubleshooting data are stored in the directory which its name begins with "esfsnap_". Before executing this
command, please check that
dirName
directory has the following free space.
Collected Information Required Free Space
Initial investigation information More than 40MB
All troubleshooting information More than "80 + (2 * number of registered device)" MB
- 103 -
To Next Page
Loading...
