EasyManua.ls Logo

Fujitsu ETERNUS DX100 S3 - Model Upgrade for ETERNUS Disk Storage System

Fujitsu ETERNUS DX100 S3
119 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
See
Refer to "Delete Volume" in the
ETERNUS SF Web Console Guide
for information on how to delete.
Information
Even when all shared folders have been deleted, the volume for NAS will not be deleted. In order to delete the NAS volume, delete
the NAS volume from the Web Console.
Point
In the following cases, the volume for NAS cannot be deleted from the Web Console.
- When a shared folder is present on the NAS volume
- When the NAS backup volume is mounted
- When the volume is a NAS system volume
Delete the NAS system volume from the ETERNUS Disk storage system. Refer to the ETERNUS Disk storage system manuals for the
deletion procedure.
4.7 Model Upgrade for ETERNUS Disk Storage System
When applying Model upgrade options for ETERNUS Disk storage system, ETERNUS SF Manager cannot manage the corresponding
ETERNUS Disk storage system since the device information of it is changed.
Reload configuration information and delete the license registered with ETERNUS Disk storage system. Then, re-register the license
with ETERNUS Disk storage system.
Refer to "Operation on Model Upgrade for ETERNUS Disk Storage System" in the
ETERNUS SF Web Console Guide
for details on the
operation procedures.
When you use the performance management function, update configuration information of the performance management function
in reference to "4.2.2.8 Updating Configuration Information".
- 71 -

Table of Contents

Other manuals for Fujitsu ETERNUS DX100 S3

Related product manuals