Fujitsu Eternus DX600 S3 - 6 Hardware Configurations; Controller Enclosure; Figure 41 Front View of a Controller Enclosure (with a Front Cover); Figure 42 Front View of a Controller Enclosure (Without a Front Cover)

6. Hardware Configurations
This chapter explains hardware configurations for the ETERNUS DX.
Controller Enclosure
This section explains the main components in the controller enclosure.
The controller enclosure contains an operation panel, battery units, and PCIe Flash Module (PFM) installed in
the front and controllers (CMs), host interfaces (CAs), and power supply units in the rear.
■
External Views of a Controller Enclosure
● Front View
Figure 41 Front View of a Controller Enclosure (with a Front Cover)
Figure 42 Front View of a Controller Enclosure (without a Front Cover)
1
2
3
5
6
7
4
1. Battery (BBU#0)
2. Battery (BBU#1)
3. Battery (BBU#2)
4. PCIe Flash Module (CM#0, PFM#0)
5. PCIe Flash Module (CM#0, PFM#1)
6. PCIe Flash Module (CM#1, PFM#0)
7. PCIe Flash Module (CM#1, PFM#1)
69
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems
Overview
Copyright 2019 FUJITSU LIMITED
P3AM-7702-29ENZ0