Fujitsu Eternus DX600 S3 - Table 18 3.5 Drive Specifications for High-Density Drive Enclosures

*1: The following disks are Advanced Format (512e) disks.
• 6TB Nearline SAS disks
• 8TB Nearline SAS disks
• 10TB Nearline SAS disks
● 3.5" Drives for High-Density Drive Enclosures
The 3.5" drive specifications for high-density drive enclosures are shown below.
Table 18 3.5" Drive Specifications for High-Density Drive Enclosures
Product name
Drive interface (maximum
transfer rate)
Storage media Storage capacity
Rotational
speed
SAS disks Serial Attached SCSI
(12Gbit/s)
Hard disk 1.2TB 10,000rpm
Nearline SAS disks Serial Attached SCSI (6Gbit/s) 2TB, 3TB, 4TB 7,200rpm
Serial Attached SCSI
(12Gbit/s)
6TB, 8TB, 10TB (*1)
SSDs Serial Attached SCSI
(12Gbit/s)
Flash memory 1.6TB, 1.92TB, 3.84TB —
*1: The following disks are Advanced Format (512e) disks.
• 6TB Nearline SAS disks
• 8TB Nearline SAS disks
• 10TB Nearline SAS disks
6. Hardware Configurations
Drive Enclosure
82
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems
Overview
Copyright 2019 FUJITSU LIMITED
P3AM-7702-29ENZ0